Torqued down pitch servo and fabricated aluminum fuel lines between header tank, fuel pump, fuel selector and firewall.
I am using two rivets to secure the angle brace on the front of the servo mount. Plans call for one, but that does not seem secure enough.
The fuel lines replace the stock hoses, JIC fittings and hose clamps which are not good for a pressurized system. Current kits use AS Flightline hose which are fine (but heavier and more expensive than solid aluminum lines).
I'm going to need to find a better way to coil up the excess brake line that Rans provides. It's pretty shoddy that they don't provide shorter lines for taildraggers.... they know what kit you ordered!